I'm a licensed civil engineer specializing in structural design and site development — bridges, foundations, and the load paths that keep buildings standing for a hundred years.
I'm a licensed civil engineer who works across structural design, site development, and construction administration. I've spent eleven years turning soil reports and load calculations into buildings, bridges, and roads that hold up under real-world conditions.
A design that only works on paper isn't finished. I check my own math against code, against the contractor's constraints, and against the worst-case load — not just the average one.
Denver, CO·P.E. License #CO-48213
Open to senior structural roles
02Built Work
Projects on the ground.
NO. 01Structural Design · Municipal
Cedar Creek Pedestrian Bridge
Designed a 140-ft steel truss pedestrian bridge spanning a flood-prone creek, engineered for a 100-year flood event.
Civil 3DRISA-3DSTAAD.Pro
Approved on first permit submission
18% under construction budget
Rated for 100-year flood loading
NO. 02Geotechnical · Residential
Harbor View Apartments — Foundation Redesign
Redesigned the foundation system for a 6-story residential building after a survey revealed expansive clay soil.
Civil 3DPLAXISExcel/VBA
Eliminated need for deep piles, saving $1.2M
Settlement reduced to under 1 inch
Avoided a construction delay
NO. 03Site Development · Stormwater
Maple District Site Grading & Drainage
Led grading and stormwater design for a 22-acre mixed-use development, managing a 100-year storm event on-site.
Civil 3DHydroCADArcGIS
Zero net increase in runoff
Cut/fill balanced on-site, no import or export
Permitted in a single review cycle
NO. 04Structural · Commercial
Lincoln Ave Parking Structure
Structural design for a 5-level, 600-stall precast concrete parking structure adjacent to an active rail line.
RISA-3DCivil 3DBluebeam
Designed for rail-adjacent vibration loads
600 stalls delivered on schedule
Zero structural RFIs during construction
03Experience
Eleven years on record.
Senior Structural Engineer · Hargrove & Pine Engineering
2019 — Present
Lead structural design for municipal and commercial projects, and stamp drawings as engineer of record.
P.E. of RecordStructural DesignTeam Leadership
Project Engineer · Caldwell Civil Group
2015 — 2019
Managed site development and stormwater design for mixed-use and residential developments.
Site DevelopmentStormwater DesignPermitting
Engineer-in-Training · Caldwell Civil Group
2013 — 2015
Rotated through structural, geotechnical, and transportation teams while completing P.E. licensure.
Structural AnalysisField InspectionAutoCAD
04Skills
Measured proficiency.
Structural Analysis
RISA-3D / STAAD.Pro
92%
Load & Seismic Analysis
88%
AutoCAD Civil 3D
95%
Steel & Concrete Design (AISC/ACI)
90%
Site & Geotechnical
Grading & Drainage Design
85%
HydroCAD / Stormwater Modeling
80%
ArcGIS
70%
Geotechnical Report Review
82%
05Credentials
Licenses & education.
Professional Engineer (P.E.) — Civil
NCEES / State Board
2016
B.S. in Civil Engineering
Colorado School of Mines
2013
OSHA 30-Hour Construction Safety
OSHA
2021
Envision Sustainability Professional
ISI
2022
06Contact
Have a site to spec?
New construction, a structural review, or a permit set that needs a stamp — send the details and I'll follow up.
